Leave Your Message
D5000 Cooling Simulation Result(Ambient Temperature: 35°C)

D5000 Cooling Simulation Result(Ambient Temperature: 35°C)

2024-10-12

Mainboard thermal source section is modeled as a single thermal resistance.

Preliminary design: Use the two fan models provided by the client, 3004 and 3007. The casing is slightly simplified, and screws, interfaces, and certain components of the mainboard are excluded from the simulation scope. 

view detail
d5000 Cooling Simulation Result( 20C° ambient temperature condition)

d5000 Cooling Simulation Result( 20C° ambient temperature condition)

2024-10-12

Preliminary design: Use the two fan models provided by the client, 3004 and 3007. The casing is slightly simplified, and screws, interfaces, and certain components of the mainboard are excluded from the simulation scope. 

view detail
op6000 Cooling Simulation Result

op6000 Cooling Simulation Result

2024-10-11

Simulation Parameters:

1. Ambient temperature: 50°C, no external wind.
2. Thermal interface material: 6W.
3. Thermal power dissipation as shown in the figure below.
4. Inlet and outlet ventilation hole opening ratio: 60%.

view detail
220W LED Project Report

220W LED Project Report

2024-10-11

Diameter: 59.5mm
Material: Aluminum substrate (Series 1)
Heat Power Consumption: 220W
Ambient Temperature: 35℃

view detail
Simulation Report for 160W Lighting Fixture (Ambient Temperature: 35°C)

Simulation Report for 160W Lighting Fixture (Ambient Temperature: 35°C)

2024-10-11

Diameter: 59.5mm
Material: Aluminum substrate (Series 1)
Heat Power Consumption: 220W
Ambient Temperature: 35℃

view detail

solution